FAN CAP

Stay cool with the Sun right at your top. While the Sun shines, this unique cap taps its power. This power is then used to operate a small fan, which cools your moist face and forehead.

• Light weight and Stylish
• Un-breakable plastic fan
• Solar cell aesthetically blended with the cap
• Your best companion for outdoor activities like Golfing, Jogging, Picnicing, Camping, Fishing etc.

This summer add a feather to your cap-Go Solar!

SOLAR BLINKER WARNING LIGHT

Tap the Earth's Oldest Source- The SUN-to illuminate your patio, driveway,walkway or use as obstruction light.

The Light can easily be installed at any place under the sun. The Ni-CD/Ni-Mh batteries are charged thru the Sun's energy during the daytime and powered the lamp in the evening. The Light Switched 'ON' automatically at Dusk and Switched 'OFF' at the dawn through the inbuilt State-Of-Art circuit. The Lamp is designed with Super Bright Red/Yellow bulbs to provide brightrer light and longer operating Hours.

Stand-alone & wheather proof, a Solar Light incorporates the world renowed Crystalline Solar Panel, discretely positioned on top of the lamp body which collects energy during the day from sunlight. The light can be installed anywhere within few minutes.

KEY FEATURES :

• Easy to install, No electrical wiring required.
• High quality weatherproof construction for long term all weather durability.
• Premium quality Solar Cells & High capacity Ni-CD/Ni-Mh battery. Automatic Dusk/Dawn switching.
• Super bright white LED with 1,00,000 hours life.

The lights are available in different models:

1. Red/Amber LEDs with blinking feature
2. Red/Amber LEDs with constant glow feature

APPLICATIONS

• Road Divider & Police Barrier.
• Road side indication for construction activities.
• Entry Gate for important buildings. VIP car
• High Rise buildings for Aviation Warning purpose.

LED BASED CEILING LIGHTS

This LED based Ceiling Light is ABS body with stylish diffuser. The light can be designed in DC or AC voltage.

KEY FEATURES

• Attractive & Durable ABS body.
• Use Ultra White LEDs Lamp.
• Life of the lamp is >50,000 Hrs.
• Very low power consumption
• Can operate on DC or AC Voltage.
• Option 12/24/48 VDC or 230 V AC.

ROAD STUDS

KEY FEATURES :

• High Intensitity LED's.
• Solar Powered for isolated or stand-alone applications.
• Body made of special Aluminum alloy.
• Ideal for Highway, Park lot, Road etc. and can be widely used in similar traffic projects.
• Available in different colours.

TECHNICAL SPECIFICATIONS

APPLICATIONS

• Wet Roads - Conventional reflective markers lose their visibility when the road are wet. The Solar Road Stud's active illumination remains brightly visible, unaffected by wet conditions.
• Foggy Conditions - High intensity LED spotlights penetrate fog to help the driver to negotiate curves.
• Dark Rural Roads - Illumination from the Solar Road Stud can eliminate the need for street lighting while maintaining safe driving conditions.
• Mountain Roads - Help to show approaching sharp turns and blind curves at night time. The studs can also be mounted on guard railing to provide even greater visibility on twisted mountain roads.

SOLAR WATER PUMPING SYSTEMS

Features :-

Solar Photovoltaic Water pumping System are modular, flexible and are of two basic types i.e. Shallow well type & Deep well type. The pumping systems are extremely rugged, maintenance free & do not need any other external source of power. D.C. power is generated at site itself and fed to the pump. They are ideally suitable for those areas where conventional grid supply is either erratic or non-existant. Also SPV pumps require only one-time investment with no recurring cost and have a long life.

Applications :-

• Drinking water
• Irrigation
• Agriculture related use
• Horticulture
• Animal Husbandry
• Poultry farming
• High value crops
• Orchard
• Seri-culture
• Aqua-culture
• Farming
• Battery charging & Lighting when pump is not required for water lifting

The above discharge is at the standard isolation level and at STC and subject to production variations.

These are standard models, however, URJAGHAR can also design and supply as per specific customer requirement.

TRAFFIC LIGHT CONTROLLER

SPECIFICATIONS OF LED based SPV POWERED TRAFFIC LIGHTING SYSTEM

LED based Traffic Lights have remarkable advantages in the lighting power, reliability and longer life in comparison with the traditional bulbs. They are available in three colours Red, Amber Yellow and Green. The advantages of using such devices, besides the exceptional lighting efficiency, are their particular radiation angle, allowing to concentrate the light in a very tight angle, which permits the visibility even from long distance and in bad conditions, i.e. when the sunlight comes from behind the traffic light, as well as no "phantom" effect due to the direct sunlight reflex on the parabola through the lens. The electronic controller allows a constant current supply of the LED's together with light control. The controller is designed Working temperature from -20°C to 70°C.

TECHNICAL SPECIFICATIONS

• SUPPLY 24 Volts DC
• CONSUMPTION (MAX.) 10W
• MTBF (ESTIMATED) 100,000 Burning hrs.
• COLOUR OF LED LAMP
• NOS. of LAMP
• SPV MODULE ARRAY
• BATTERY BANK RED, AMBER, GREEN 32 Nos. 500 Wp 24 Volts, 300 Ah tubular plate Lead Acid Battery

GENERAL :

These Traffic Controller have been designed to confirm to Indian Standard specification IS: 7537-1974 & British Standard Specification No. BS:505-71 wherever applicable and standard international practices.The Controller is sold state and has no moving parts. The controller employs fully IC controlled Circuitry on double side glass epoxy PCBs which have been masking to counter, tracking problem and is modular is design, having plug in system for easy maintenance arid operations. System design is such that it takes care of conflicting lights on opposite roads and has' short circuit protection and-optically isolated outputs.

CAPABILITY OF THE CONTROLLER :
The basic controller is capable of being operated in any of the following modes :

1. As an independent fixed time controller at an isolated intersection.
2. As a manually operated controller with operational remote station at police booth. The main frame of the controller will have facilities for extending the capability of the controller for any of the following additional modes of working by addition of suitable modules at any later stage.
3. As a part of micro controller based multi-programmable system.

HARDWARE :
1. CPU : 89C52/51 (Atmel/ Phillips/equivalent)
2. Memory : N V RAM (In Built backup - Dallas) & EEPROM
3. Clock : Built in RYC with 10 years-battery backup
4. Protection : Auto Shut down on power fluctuation beyond limits and Auto up on restoration
5. Output switching : Through solid state devices with zero cross over and optically isolated
6. Input I Output isolation : Output switching isolated from control circuit by optical isolation
7. Police Control Panel : Output OFF, Auto I Manual Step & Flash, L Test
8. Programming Facility : i. PC Compatible by RS 232 communication ii. Built in Keyboard & LCD display
9. Supply Voltage : 170 V to 220 V AC, 50 Hz or 12/5 V DC
10. Power consumption : At AC I/P < 50 Watts. At DC l/P < 8 Watts.
11. Max. Controller load : 4KVA

FEATURES :
• Max number of signal D/P : 32 Nos.
• Number of stage : 1-32 stages
• Max number of signal plans : more than 24 plan
• Max number of day plans : 8 holiday plan + weekly plan 8 per day + 24 routine plans
• Max number of plan transitions : 24 per day
• Max number of holidays per annum : 10

SIGNAL SEQUENCES :
• Vehicular Groups : Red - Green – Amber Blink /ON/OFF mode
• Pedestrian Group : Red – Green Blink /ON/OFF mode

MODES OF OPERATION :
• CABLE LINKING MODE
• FIXED TIME
• MANUAL OPERATION

FRONT PANEL CONTROLS :
The traffic control unit will incorporate the following controls on the front panel:

• ON I OFF Switch
• Control circuit fuse
• Control Circuit Supply Indicator
• Lamp Test Switch
• Stage Indicators
• LCD display 2 Line 16 Digit with Back light
• Keyboard for onsite programming Auto manual switch
• Flash mode switch

CAPACITY :
The basic controller is designed to provide for control of vehicular and Pedestrian traffic having control of 32 outputs, as per requirement. The Controller will be capable of providing any required o/p signal sequence. The controller will have 24 cycle plans (including one for night flashing) It will be possible to "buildup a 24 hours day plan from the combination of Cycle plans such that a particular cycle plan is in operation during any Desired period of the day. It will be possible to provide more than 24 Changes of cycle plans in a period of 24 hours. With the help of keyboard & display unit in Simple English menu, system can be programmed or edited 'at site by operator I police man even without knowledge or training of electronics or software programming.Controller can be programmed for weekdays of the month and for holidays or any special day of the year.

BASIC CONTROLLER REQUIREMENT :
The operation of all signals will be positive without dark intervals or flickering lights. The signal light switching wiring is interlocked to prevent simultaneous display of conflicting green signals.The Controller will have facility to set each stage time for any duration from 1 to 199 seconds. The change from one cycle plan to the next cycle plan will occur at the end of a cycle and not halfway through a cycle. Similarly the first cycle of the new plan will start with stage one and not midway through a cycle. In any day plan, it will be possible to repeat the same cycle setting for multiple cycle plans.

FLASHING SIGNAL :
The controller will be equipped with a reliable electronic flashing unit that would flash Amber signals in the following conditions :

• When the day plan provides for it.
• When fault monitor alarm has detected a fault in the signaling system.
• When switched to this mode by manual control.

The flashing unit will confirm to the following specification :

• A solid state blinker will be provided for flashing Amber signal lights.
• The flashing rate will be within the rang of 30 to 40 flashes per minutes when this voltage varies in the range between +15% and -20% of the nominal values +/- 4% of its nominal frequency.

MANUAL OPERATION :
It will be possible to bring the controller under manual control by operation of auto manual switch in police box. The operation of the switch would result in transfer control over the duration of each stage from the electronic timing unit of the controller through a push button only manual control switch. The sequence of stage preset on the electronic unit will remain undisturbed.Each time of push button is pressed, the current stage will changeover to the next stage in the controller. The duration of the' stage in the manual -control is determined by the interval between successive operation of the push button.A separate over-riding switch is also provided in the police box such that the operation of the switch puts the controller to flashing Amber mode.

Solar Photo Voltaic (SPV) Dusk Dawn System

Introduction :-

Solar Photo Voltaic (SPV) Dusk Dawn System is an energy saving device used for automatic switching of street lighting systems, making proper use of grid power and increasing the life of the lamps by switching the street lights for a optimum period. The system is highly reliable and efficient for years of continuous flaw-less operation.    The operation of the system is based on sensing the ambient light level which actuates the electronic controller to switch ON the street lights  in  the  evening and switch OFF in the morning. The sensor which is a small Solar photovoltaic  panel  is  totally maintenance free and encapsulated  in  an hermetically sealed housing making it more reliable even in adverse atmospheric conditions. 

The  system  has  the  advantage of automatic setting of switching timings irrespective of whether it is winter or summer,  thus  making  it  a  totally  unmanned operation. Once  set  for  a  particular  ambient  light  level,  the setting  remains unchanged throughout the year.

Features :-

• Automatic switching and hence unmanned operation.
• Optimal use of grid power.
• Energy saving up to 30%.
• Enhancement of pole-lamp life.
• Highly efficient, reliable and economical.
• System design can take care of any grid load / safety precautions.
• No seasonal time setting required.
• Highly weather proof and totally maintenance free sensor.
• Protection against line to line, line to neutral & line to earth fault.
• Manual by-pass in case of system failure.
• On Line service facility.

Specifications :-

• Housing: Kiosk type, weather proof pole mounting panel of required size.
• Sensor: SPV Solar Photo Voltaic sensor of suitable capacity encapsulated in an environment - proof housing.
• Electronic Controller: Electronic controller of rugged design for automatic switching at Dusk - Dawn. Customized designs for fixed no of hours also available.
• Protection: Against line to line, line to neutral and line to earth fault.
• Electrical switch gear unit of rated power capacity.

Special Features :-

• Manual by-pass in case of exigency. 
• Pole mounting facility 

RATED LOAD (per phase)  : 100 AMPS, 60 AMPS, 30 AMPS

SOLAR VACCINE REFRIGERATION SYSTEMS

URJAGHAR Solar Vaccine Refrigeration System (SVRS) improves your medical response time and helps you save lives when you need it most. The SVRS is especially ideal for rural health centers not close to main power supply lines or larger medical facilities. SVRS systems from URJAGHARensure safe and efficient preservation of temperature sensitive vaccines and biological materials. The system's temperature is precisely regulated to preserve the vaccine 'cold-chain' which is so important for your successful medical implementation. With only one moving part and a low cost of maintenance, the SVRS is certainly the most appropriate and cost effective choice for any rural Health Center.

Solar power doesn't have the health and safety risks associated with kerosene

Solar Vaccine Refrigeration System are expandable to other health center needs. In addition to providing clean reliable lighting and communication devices,you will be able to power TVs for community and health related programs and many more applications as well. You will eliminate noisy generators and unhealthy kerosene lamps making your health care center a brighter and healthier place to work. It has been shown that improving the living and working environment of the health care workers greatly benefits the motivation of the health care providers and the quality of the care.

SOLAR FENCING

Advantages of Solar Powered Fence

• Round the clock Vigilance – 24/7 x 365 days · Provides an ACTIVE DETERRENT to the would be intruder
• Intruder gets a very sharp, short and painful but non-fatal / safe shock
• Unauthorized Access to property is denied
• Zero Downtime - Works on SOLAR POWER
• Customized design, quality and rugged construction
• Trouble-free User friendly system, minimal maintenance
• System reliability ensures virtually NO FALSE ALARMS
• Is unaffected by sun, wind, rain, snow, sleet, fog, birds or wild animals
• Reduces Insurance, security and management costs, – short pay back period

Major Components of Solar Fencing

• Energizers
• Solar Panel
• Tubular Battery
• Fence Wire
• Insulator
• Fence Siren
• Posters
• Tightner

Solar Powered Fence

• Is a most effective and viable perimeter security alternative that meets present day needs.
• Provides maximum protection against intrusion, theft, pilferage, sabotage
• Is an active deterrent - not only delays / denies entry to a secured area but detects intrusion and indicates the area of attempted intrusion on a graphic panel in the Control Room.
• Can be added to or replaces any existing perimeter wall, chain link fence -Full Fence or Wall Top
• Can be integrated with Access Control Systems, Security Lighting, CCTV Systems, Auto Dialers  can activate a hooter, siren or flood lights on intrusion alarm.

Solar Powered Fences are powered by an ENERGIZER which sends out high voltage monitored pulses into the fence at controlled intervals. An intruder or trespasser gets a very sharp, short and painful shock. Solar Powered Fence is the physical barrier but the shock is the real barrier - a psychological barrier created in mind of the person, who has experienced the shock!!!. The shock given by the fence is completely safe as it lasts only 3 millionths of a second with energy output of 4 - 5 joules, an internationally accepted standard for such types of fences, worldwide.

Ideal for installation at:
Very high threat perception areas such as Political, Defence and strategic establishments of all types (ammunition/armament factories, dumps & depots, naval stations, army outposts), Civil airports and Military airbases and runways, International borders, Prisons, Helipads, Mines, Mints, Factories and Plants, Office and residential complexes, Warehouses, Country Clubs, Farms and Farm Houses, Bungalows, Open stockyards (Cars, Oil, builders materials).

SOLAR EDUCATIONAL KIT

• Designed and developed to educate students on the applications of Solar Power
• simple modes of operation
• Comes with easy-to-understand study notes
• Portable, rugged and weather-proof
• Nickel cadmium battery
• Equipped with voltmeter, ammeter and potentiometer
• Calculator, clock, torch and transistor loads

SOLAR MOBILE CHARGER

• 1.Compact Design
• 2.Appealing Aesthetic of Body
• 3.User Friendly system
• 4.Maintenance free
• 5.One years Warranty
• 6.Pollution free and Environment Friendly.

LUMINAIRE