DISPLAY POWER FACTOR , VOLTAGE , CURRENT.

LED SHOW NUMBER OF CAPACITORS ADDED.

CURRENT TRANSFORMER AND MCB INCLUDED.

2.5kVA, 5.5kVA, 7.5kVA MODELS AVAILABLE.

VIDEO COMING SOON...

PF-GUARD
AUTOMATIC POWER FACTOR CORRECTION PANEL
Most of the commercial and Industrial installations in the country have large electrical loads which are severely inductive in nature, such as motors, large machines, air conditioners, drivers etc. Which results in a severely lagging power factor? This means loss and wastage of energy and heavy penalties by electricity boards. In case of fixed loads this can be taken care by manual switching of capacitors. However in case of rapidly varying and scattered loads it becomes difficult to maintain a high power factor by manually switching on/off the capacitors in proportion to variation of load  within an installation. This drawback is overcome by using an APFC panel (Automatic Power Factor Correction Panel) which not only maintains a high power factor but also eliminates, the need for constant manual intervention.
 
The ratio of Active Power to Apparent Power is called Power Factor (PC):

Power Factor =    Active Power / Apparent Power =     KW / KVA

Advantages - " PF-GUARD "
 
1.    Economical with faster payback periods.
2.    Ability to maintain a constant high power factor.
3.    Eliminates low power factor penalties levied by EB.
4.    Reduces the KVA demand charges.
5.    Improves efficiency of the system by reducing losses.
6.    Prevents leading power factor in the installation during low load
       conditions.
 
Salient Features - " PF-GUARD "

1.   Designed with the concept of modularity which allows upgrading of KVAR
      rating as when required.
2.   Incomer MCCB for connection to the mains.(HAVELLS)
3.   Advanced microprocessor based relay used to ensure real time power         
      factor correction in the installation.
4.   L&T/SIEMENSE contractors specially designed for capacitor switch.
5.   Fuses for rack protection.
6.   Specifically designed, user friendly and dust & vermin proof modular sheet
      metal cabinet.
7.   Provision of incomer cable from side top. 
8.   Efficient performance trans air exhaust fan for cooling.
9.   Low loss three phase MPP capacitors(GAS FILLED MADE OF WEST
      GERMANY)  housed in aluminum cans.
10.  Wide range of rating with standard devices for faster deliveries.

PANEL DISPLAYS-
FUNCTION-

1. AUTO/ MANUAL    (2)COS PHY    (3)PF          (4) VOLT

(5) WATT        (6)VAr        (7) VA (8) CURRENT

FAULT ALARM-
     (1)OVER VOLTAGE     (2)OVER COMPENSATION    
     (3) INSUFFICIET COMPENSATION

DIGITAL POWER SAVER

Electric Supply is subject to surges from time to time, which result in spike of parasitic peak that cannot be uses by your appliances while working. These spikes simply consume electricity of no benefits and are billed to you every month. In worse condition, they result in overheating which shorted the life of your appliance and wirings and in extreme cases and cause, blow outs, cuts; Digital Power Saver does not consume electricity itself. You can use it 24/ 7 all year round.

Digital power saver fine tunes electrical system in your home or office. This fine tuning reduces heat generation reduces amperage and results in reduced consumption of electricity. It causes less waste of electrical energy while increasing the life of inductive equipment in your home or office. It protects against power surge and increases the capacity of the electrical panel by making it run cooler.

HOW IT WORKS

All electric supply is subject to spikes & surges, which consume electricity of no use & are adapted to the monthly bill. DPS is an electronic device, designed with latest technology which stabilizers these surges and optimizes the power factor of the electricity drawn by an electrical appliance.

The device corrects the losses due to poor power factor of incoming line and appliances. First we have to check the input power factor then across the load, in normal Indian power condition with mix load like tube lights and fans on single phase input line, the power factor comes down to 0.5. our device saves 25% at the load of about 400W-500W(on that load you get 25-35% savings), definitely the device will gradually proceed on optimizing.

Digital power saver uses a combination of filtration & correction techniques to improve the efficiency of various equipments. In addition, this intelligent technology optimizes the voltage and current demands, thus reducing the active power/ KWH demands& can achieve up to 40% of saving in electricity bill.

It also acts as a voltage stabilizer by storing energy for up to 10 seconds & therefore supplies load with proper voltage during momentary surges. It also improves safety by
reducing the overheating of electrical wiring; enhance the efficiency of appliances & extending their Life span as well.

Digital power saver does not consume electricity itself. You can use it continuously 24 hours a day all year round without affecting your electricity costs.

DPS is suitable for inductive & capacitive appliances as stated below

• Air conditioners
• Water pump
• Air cooler
• Mixer / Grinder
• Refrigerator
• Air purifier
• Television
• Vacuum cleaner
• Washing Machines
• Tube lights
• Music systems
• Fans
• Computer

Usage
Shops, Homes, Restaurants, Offices, Micro Industries (Single Phase)

Specifications

Rated Voltage : 90V - 250V
Rated Frequency : 50Hz - 60Hz
Phase : Single
Max savings at 500W
Maximum Load : 16000W
Working Temperature : 15C - 60C
Color : All Available (bulk order)

Precautions

• Plug in the device firmly to avoid loose connections.
• Keep away from children.
• Do not tamper, open or repair the DPS by yourself.
• Two Year full Replacement Warrantee against manufacturing defects.
• Warrantee void if seal is broken or tampered with

How to install

Locate the circuit Breaker (consumer Unit) in your house. Find a 13 amp outlet which is the nearest to the Circuit Breaker (Consumer Unit). Plug the electric saver into the 13 amp outlet and switch on the unit.

Packing

DPS comes in corrugated color box.

Dimensions
Length 190.00 mm Width 110.00 mm Height 90.00 mm
Weight 215.00 gm

Outer box is on 10 units.
Dimensions
Length 575.00 mm Width 200.00 mm Height 205.00 mm
Weight 2.5 Kg.

Power Saver Demonstration

Demo can be seen in 3 Easy Steps, as shown below.

BEFORE INSTALLATION

AFTER INSTALLATION